Engergy Saving Tips for Your Home Appliances

Smart energy saving tips
Cover and cook with little water
By sparing use of water while cooking pasta, rice, potatoes and vegetables will reduce the cooking time. A cover retains heat so you save considerable power.

Use the new technology of induction
Induction cook tops generate heat only there, where they are used. You heat the water about 30 percent faster than with ceramic hobs. And the cooking itself hardly gets warm then nothing will burn. This saves 50 percent energy and time.

The right pangrootte use.
If no induction cooker is used, every inch of the pot or pan is smaller than the cooking area, until 20 or 30 percent more consumption lead.

Cooking and baking with heat
Use the residual heat. Turn the baking temperature reached the device early. Pasta is also called "al dente", if the water warms and only bring to the boil with water, rather than the five to ten minutes over medium heat cook.

Open the oven during operation
Turn the oven off when it is opened for inspection. This reduces hot air blown out of the oven. The intelligent cooking and baking with optimized heat treatment manages to cook without much worry. Better insulation and special glazing reduce energy consumption and protects against burns from hot glass fronts.

 Refrigerators and freezers use carefully
Always open the door briefly, so the temperature goes higher and less ice is formed. Defrost regularly saves power. New devices are much better insulated and lose almost no heat or cold. With the No-Frost technology lapse difficult thawing ice and discard. The full energy is never erased. New devices also offer many opportunities; best food and coal remain 3x longer fresh. While that saves no power, but protect your wallet and it's healthy.

Wash without a guilty conscience environment
Besides the energy consumption in dishwashers in particular the costs for water and wastewater is crucial. The dishwasher should be enabled only fully loaded. New devices offer special programs with the possibility of "half load" efficiency and to rinse. Today, sensors detect the type and amount of load automatically, allowing for optimal cleaning is offered at the lowest power and water consumption. The best devices are happy with 7 liters per rinse.

Replacement of old equipment - with open eyes
When replacing appliances that are older than ten years, against energy-efficient new equipment. Better insulation, better program selection techniques and new devices not only save water and electricity but also make the job easier and takes pleasure in the new environment. Check to buy the independent energy label. Current top devices, energy efficiency class A +. Inexpensive devices are often not the best long term alternative!